2020 Latest Design Ptfe Inner Convoluted Hose Crimping - PTFE Corrugated Hose Kink Resistance Braided Factory | BESTEFLON – Besteflon
2020 Latest Design Ptfe Inner Convoluted Hose Crimping - PTFE Corrugated Hose Kink Resistance Braided Factory | BESTEFLON – Besteflon Detail:
Benefits:
High working and burst pressures; Most economical of all hoses with PTFE; The low-friction surface of smoothbore hose provides for high flow rates; Easily drained and/or cleaned.
The objective in the pipeline design, the assembly can achieve the following purposes: absorbing vibration, suppressing the noise transmitted by rigid pipe, adapting to reciprocating and bending motion, and adjusting or correcting the micro-vibration. The pitch of the hose can be varied to meet the performance requirements rating in terms of flexibility and pressure.
The purpose of the stainless steel braid is to prevent elongation. The braided fabric is made of stainless steel wire, and the braiding tension is generated by the braiding pressure to provide radial and axial constraints. The multi-braided assembly adapts to higher pressures.
Bestflon brand PTFE hose has data sizes ranging from 3 / 16 “to 2″. Stainless steel braided PTFE bellows have a pressure range of up to 2944 psi, depending on size and operating conditions. Temperature components depend on construction and design and can operate from – 65 ° C to + 260 ° C.
Inside wall
thin-walled, spiral-corrugated white PTFE
Braiding
single stainless steel 304 wire braiding
Temperature range
from -65 to +260 ºC(-85°F—500°F)
Couplings
press-fitted couplings in any design and material type
Characteristics
Agile/Corrosion resistance/Antisticking agent/Temperature resistance/Suitable for pressure and vacuum/Suitable for high mechanical strength
Product Details
| Brand Name: |
BESTEFLON |
| Material: | PTFE |
| Specification: | 1/8” to 1” |
| Thickness: | 0.85/1/1.2/1.5MM |
| Inside hose color: | milky white/translucent |
| Temperature range: | -65℃–+260℃ |
| Wire braided: | 304/316 stainless steel wire braided |
| Appliecation: | Chemical/Machinery equipment//Compressed gas/Fuel and lubricant handling/Steam transfer/Hydraulic systems |
Convoluted Hose Range
| No. | Inner diameter | Outer diameter | Tube Wall Thickness |
Working pressure | Burst pressure | Minimum bending radius | Specification | sleeve size | ||||||
| (inch) | (mm±0.2) | (inch) | (mm±0.2) | (inch) | (mm±0.1) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
| ZXBW201-04 | 3/16″ | 5.0 | 0.433 | 11.0 | 0.035 | 0.90 | 2944 | 203 | 8831 | 609 | 0.709 | 18 | -3 | ZX710-03 |
| ZXBW201-05 | 1/4″ | 6.5 | 0.472 | 12.0 | 0.035 | 0.90 | 2489 | 172 | 7468 | 515 | 0.787 | 20 | -4 | ZX710-04 |
| ZXBW1201-06 | 5/16″ | 8.0 | 0.516 | 13.1 | 0.035 | 0.90 | 2001 | 138 | 6003 | 414 | 0.906 | 23 | -5 | ZX710-05 |
| ZXBW201-08 | 3/8″ | 10.0 | 0.610 | 15.5 | 0.035 | 0.90 | 1730 | 119 | 5191 | 358 | 0.984 | 25 | -6 | ZX710-06 |
| ZXBW201-10 | 1/2″ | 13.0 | 0.756 | 19.2 | 0.035 | 0.90 | 1498 | 103 | 4495 | 310 | 1.102 | 28 | -8 | ZX710-08 |
| ZXBW201-12 | 5/8″ | 16.0 | 0.906 | 23.0 | 0.035 | 0.90 | 1160 | 80 | 3480 | 240 | 1.969 | 50 | -10 | ZX710-10 |
| ZXBW201-14 | 3/4″ | 19.0 | 1.055 | 26.8 | 0.035 | 0.90 | 1015 | 70 | 3045 | 210 | 2.480 | 63 | -12 | ZX710-12 |
| ZXBW201-16 | 7/8″ | 22.2 | 1.181 | 30.0 | 0.039 | 1.00 | 923 | 64 | 2770 | 191 | 3.346 | 85 | -12 | ZX710-14 |
| ZXBW201-18 | 1″ | 25.0 | 1.299 | 33.0 | 0.039 | 1.00 | 793 | 55 | 2378 | 164 | 3.543 | 90 | -16 | ZX710-16 |
| ZXBW201-20 | 1-1/8″ | 28.0 | 1.398 | 35.5 | 0.039 | 1.00 | 575 | 40 | 1726 | 119 | 3.740 | 95 | -18 | ZX710-18 |
| ZXBW201-22 | 1-1/4″ | 32.0 | 1.634 | 41.5 | 0.055 | 1.40 | 450 | 31 | 1349 | 93 | 3.937 | 100 | -20 | ZX710-20 |
| ZXBW201-26 | 1-1/2″ | 38.0 | 1.890 | 48.0 | 0.059 | 1.50 | 392 | 27 | 1175 | 81 | 6.102 | 155 | -24 | ZX710-24 |
| ZXBW201-32 | 2″ | 50.0 | 2.461 | 62.5 | 0.079 | 2.00 | 300 | 21 | 899 | 62 | 7.874 | 200 | -32 | ZX710-32 |
* Meet SAE 100R14 standard.
* Customer-specific products may be discussed with us for detailed.
Production workshop
You may also like
People also ask
How to cut the PTFE hose to avoid damaging the pipe?
In order to achieve the above purpose, the utility model provides the following technical scheme: a cutting device for the manufacture of polytetrafluoroethylene pipes, including a worktable, the upper surface of the worktable is provided with a bracket, the center of the lower surface of the support is fixedly connected with a hydraulic cylinder, the output shaft of the hydraulic cylinder is fixedly connected with a cutter, and the center of the upper surface of the worktable is provided with a first groove The first groove is located directly below the cutter, one side of the first groove is provided with a second groove, the second groove is provided with a first plate body, the outer wall of the first plate body is uniformly installed with a first slide block, the first sliding block slides in the second groove, one side of the first plate body away from the first groove is fixedly connected with a rocker The front surface of the worktable is provided with a third groove, the rocker is located in the third groove, the first groove is provided with a limit plate, one side of the limit plate far away from the first groove is fixedly connected with a bearing, the back surface of the worktable is provided with a threaded through hole, and the screw rod is connected with the thread in the threaded through hole.cut the PTFE hose
Product detail pictures:
Related Product Guide:
No matter new customer or old customer, We believe in long term and trusted relationship for 2020 Latest Design Ptfe Inner Convoluted Hose Crimping - PTFE Corrugated Hose Kink Resistance Braided Factory | BESTEFLON – Besteflon , The product will supply to all over the world, such as: Tunisia, Mombasa, Albania, Insisting over the high-quality generation line management and prospects guide provider, we've made our resolution to offer our shoppers using the initially stage purchasing and soon after provider working experience. Preserving the prevailing helpful relations with our prospects, we even now innovate our product lists the many time to meet up with the brand new wants and stick to the latest trend of this business in Ahmedabad. We're ready to facial area the difficulties and make the transform to grasp many of the possibilities in international trade.
We offer the usual packing as follows
1、Nylon bag or poly bag
2、Carton box
3、Plastic pallet or plywood pallet
Customized Packaging is charged
1、Wooden reel
2、Wooden case
3、Other customized packaging also available
By Victoria from Estonia - 2017.11.20 15:58
We have worked with many companies, but this time is the best，detailed explanation, timely delivery and quality qualified, nice!
By Caroline from Seychelles - 2017.01.11 17:15
