Hot-selling Ptfe Brake Hose - 1/8 ptfe brake hose with pvc covering | BSETEFLON – Besteflon
Hot-selling Ptfe Brake Hose - 1/8 ptfe brake hose with pvc covering | BSETEFLON – Besteflon Detail:
1/8’’ PTFE brake hose
One of the great advantages of PTFE Brake Hose is its incredible flexibility.
When you need a tube to change direction, you can choose either to bend it or to place an adapter on it. This will have an impact on the flow rate and will also cause a drop in pressure. The more components you add, the higher overall cost will be. PTFE brake hose, on the other hand, have similar pressure capacity, but may not require joints and elbows.
Polytetrafluoroethylene (PTFE) is usually used as the main Fuel Line in jet airliners.
If the passenger plane encounters an accident, the fuel pipeline will not break under pressure, and eventually will not cause fire hazard. The flexibility of the hose means that you can easily handle the offset between two elements of the system. The hose is actually very important to the designer and the erector of the fluid system.
PTFE is a hard nut to crack.
It is usually corrosion resistant and easy to clean. If you use it correctly, it can have a long service life extended by decades. It is not as conductive as stainless steel tubes, so it provides additional strength and reliability.
Braided stainless steel PTFE hose is much more expensive than rubber hose.
You’ll find that PTFE brake lines can only be seen on premium cars, such as hot sticks and super sports cars, or on racing cars, which you can find in formula one and RV series.
Label: application of PTFE brake hose, PTFE brake hose, PTFE hose and PTFE tube.
Product Details
| Brand Name: | BESTEFLON |
| Temperature range: | − 65 ℃～ + 260 ℃ |
| Working pressure: | 225bar ~ 44bar |
| Burst pressure: | 900bar ~ 176bar |
| Material: | PTFE |
| Inner layer: | ptfe hose |
| Reinforcing layer: | stainless steel wire braiding |
| Outer layer: | PVC, PU (black, red, blue, yellow, purple, transparent, gray, orange, etc.) |
| Hose size | An3, an4, an6, an8, an10, an12, an16, an20 |
| Inner diameter | 3.56mm, 4.83mm, 8.13mm, 10.7mm, 13mm, 16.3mm, 22.2mm, 28.6mm |
| Outer diameter | 6.35mm, 8mm, 10.9mm, 13.7mm, 16mm, 19.3mm, 26.2mm, 32.8mm |
| Length | any length |
Features of stainless steel braided PTFE brake hose:
Application:
AN SERIES PTFE BRAKE HOSE
| No. | Specification | Outer diameter | Inner diameter | Working pressure | Burst pressure | Minimum bending radius | |||||
| (inch) | (mm±0.2) | (inch) | (mm±0.1) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | ||
| 1 | -3 | 1/4 | 6.35 | 9/64 | 3.56 | 3260 | 225 | 13040 | 900 | 3/76 | 1 |
| 2 | -4 | 5/16 | 8 | 3/16 | 4.83 | 2750 | 190 | 11000 | 760 | 1/30 | 0.85 |
| 3 | -6 | 27/64 | 10.92 | 21/64 | 8.13 | 2540 | 175 | 10160 | 700 | 1/30 | 0.85 |
| 4 | -8 | 35/64 | 13.72 | 27/64 | 10.67 | 2030 | 140 | 8120 | 560 | 1/30 | 0.85 |
| 5 | -10 | 5/8 | 16 | 33/64 | 12.95 | 1740 | 120 | 6960 | 480 | 3/76 | 1 |
| 6 | -12 | 49/64 | 19.3 | 41/64 | 16.26 | 1270 | 88 | 5080 | 352 | 3/76 | 1 |
| 7 | -16 | 1-1/32 | 26.16 | 7/8 | 22.22 | 870 | 60 | 3480 | 240 | 1/21 | 1.2 |
| 8 | -20 | 1-9/32 | 32.77 | 1-1/8 | 28.57 | 630 | 44 | 2520 | 176 | 3/38 | 2 |
* Meet SAE 100R14 standard.
* Customer-specific products may be discussed with us for detailed.
Video
You may also like
People also ask
Are PTFE Fittings Reusable
When using our high-quality PTFE Hoses, compatible PTFE fittings must be used to ensure correct installation. These accessories are available in AN4, AN6, AN8, AN10, AN16, AN18 models, which can support all automotive fluids.
The PTFE reusable rotating hose end is easy to install and user friendly. With a special compression design, it can be reused without damaging the joint, and the threaded joint guide can prevent damage to the inner tube. The PTFE hose connector is mechanically clamped on the PTFE hose core to provide the greatest possible seal, and the stainless steel outer plate is clamped separately to achieve the greatest possible hose holding force
Give Us A E-Mail
sales02@zx-ptfe.com
Product detail pictures:
Related Product Guide:
We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most competitive prices. So Profi Tools offer you best value of money and we are ready to develop together with Hot-selling Ptfe Brake Hose - 1/8 ptfe brake hose with pvc covering | BSETEFLON – Besteflon , The product will supply to all over the world, such as: Manchester, Macedonia, Kuwait, We confirm to public, cooperation, win-win situation as our principle, adhere to the philosophy of make a living by quality, keep developing by honesty , sincerely hope to build up a good relationship with more and more customers and friends, to achieve a win-win situation and common prosperity.
We offer the usual packing as follows
1、Nylon bag or poly bag
2、Carton box
3、Plastic pallet or plywood pallet
Customized Packaging is charged
1、Wooden reel
2、Wooden case
3、Other customized packaging also available
By Maxine from Barbados - 2017.06.16 18:23
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Frank from Ottawa - 2018.03.03 13:09
Send your message to us:
Products categories
-
18 Years Factory Convoluted Ptfe Fuel Hose - C...
-
Trending Products Ptfe Convoluted Tube - flexi...
-
2020 New Style Ptfe Convoluted Hose - Corrugat...
-
100% Original Ptfe Tube 3mm Od - High temperat...
-
Hot Selling for Heavy Wall Convoluted Ptfe Hose...
-
Reasonable price for Ptfe Hose Wiki - 1/4″ PTF...
