6AN PTFE Hose Elu nsogbu igwe anaghị agba nchara eriri mmanụ ọkụ |BESTFLON
NkePTFE Lined Fuel Hosebụ nke nwere eriri polytetrafluoroethylene kwụ ọtọ na otu ma ọ bụ abụọ igwe anaghị agba nchara elu akwa akwa akwa.Ọ bụ isi imewe nkePTFE Smooth Bore Braided Hose.Ejirila ya nke ọma n'ọtụtụ ụgbọ ala, ọgwụgwọ mmiri, ụgbọ njem kemịkalụ, mkpuchi, ọgwụ, nhazi nri na ihe ọṅụṅụ, ihe ịchọ mma, na ngwa n'ozuzu.
Isi nke sooks bụ nke 100% polytetrafluoroethylene resin dị ọcha, na-enweghị pigmenti ma ọ bụ mgbakwunye.
Ejiri waya AISI 304 ma ọ bụ 316 igwe anaghị agba nchara mee waya a kpara akpa.
6 nkePtfe Fuel Line nwekwara ike ịgbatị ndụ ọrụ mmanụ ọ bụla, n'ihi na ọ gaghị esi ike, ịgbawa ma ọ bụ banye n'ime mmanụ ọkụ (steam na-eje ije) dị ka braid nkịtị, si otú a na-ebelata isi mmanụ na mpaghara nchekwa ụgbọala.
Anyị nwekwaraNrụgide PTFE Hosemaka ahịrị mmanụ ọkụ ịgba ọsọ dị elu, biko kpọtụrụ anyị maka nkọwa ndị ọzọ.
Ọkpụkpụ niile dị na ụdị antistatic (carbon ojii).Biko kpọtụrụ anyị maka nkọwa.
Nkọwa ngwaahịa
| Aha ika: | BESTFLON |
| Ihe: | PTFE |
| Nkọwapụta: | 5/16'' |
| Ọkpụrụkpụ: | 0.65MM |
| Agba ụdọ dị n'ime: | mmiri ara ehi na-acha ọcha / translucent |
| Oke okpomọkụ: | -65℃ --+260℃ |
| Waya kpara akpa: | 304/316 igwe anaghị agba nchara waya braided |
| Ngwa: | Ngwa kemịkalụ / igwe //Gas / mmanụ ọkụ na mmanu mmanu njikwa / nnyefe Steam / Sistemụ hydraulic |
Ogologo eriri mmiri dị nro
| Mba. | Dayameta dị n'ime | Dayameta dị n'èzí | Tube Wall Ọkpụrụkpụ | nha aka uwe | |||
| (inch) | (mm±0.2) | (inch) | (mm±0.2) | (inch) | (mm±0.1) | ||
| ZXGM121-03 | 1/8" | 3.2 | 0,248 | 6.3 | 0,035 | 0.90 | ZXTF0-02 |
| ZXGM121-04 | 3/16" | 4.8 | 0.299 | 7.6 | 0.026 | 0.65 | ZXTF0-03 |
| ZXGM121-05 | 1/4" | 6.4 | 0,366 | 9.3 | 0.026 | 0.65 | ZXTF0-04 |
| ZXGM121-06 | 5/16" | 8.0 | 0,433 | 11.0 | 0.026 | 0.65 | ZXTF0-05 |
| ZXGM121-07 | 3/8" | 9.5 | 0,492 | 12.5 | 0.026 | 0.65 | ZXTF0-06 |
| ZXGM121-08 | 13/32" | 10.3 | 0,523 | 13.3 | 0.026 | 0.65 | ZXTF0-06 |
| ZXGM121-10 | 1/2" | 12.7 | 0,626 | 15.9 | 0.031 | 0.80 | ZXTF0-08 |
| ZXGM121-12 | 5/8" | 16.0 | 0,756 | 19.2 | 0.031 | 0.80 | ZXTF0-10 |
| ZXGM121-14 | 3/4" | 19.0 | 0,874 | 22.2 | 0,035 | 0.90 | ZXTF0-12 |
| ZXGM121-16 | 7/8" | 22.2 | 1.023 | 26.0 | 0,039 | 1.00 | ZXTF0-14 |
| ZXGM121-18 | 1" | 25.2 | 1.145 | 29.1 | 0,047 | 1.20 | ZXTF0-16 |
* Zute ọkọlọtọ SAE 100R14.
* Enwere ike ịkọrọ anyị ngwaahịa ndị ahịa akọwapụtara maka nkọwa zuru ezu.
Uru
PTFE n'ime tube nwere usoro nke magburu onwe ya
1) Ogologo oge iji 200 ~ 260 ℃ elu okpomọkụ, obere okpomọkụ ka dị nro na-eguzogide - 100 ℃;
2) Na-eguzogide aqua regia na ihe mgbaze organic niile;
3) ihu igwe kacha mma / ịka nká nke plastik;
4) mmanu mmanu di elu, opekempe nke esemokwu rọba (0.04);
5) Adhesives na kacha nta n'elu esemokwu na ihe siri ike na-enweghị njikọ nke ihe ọ bụla;
6) adịghị egbu egbu anụ ahụ inertness;
7) Ọrụ eletriki dị mma, ọ bụ nhọrọ dị mma maka ihe mkpuchi nke klas C.
Ụlọ ọrụ mmepụta ihe
Ị nwekwara ike ịmasị gị
Nye anyị ozi-e
sales02@zx-ptfe.com
Kedu ihe bụ PTFE Fuel Hose
A na-eji eriri PTFE na mbụ na mpaghara ụgbọ ala ma bụrụ ngwa ngwa na-ewu ewu.Ọkpụkpụ nke sitere na polytetrafluoroethylene na-arụ ọrụ dị mma karịa eriri roba na ngwa ụgbọ ala n'ihi nnukwu azụmahịa ha dị na arụmọrụ ha dị mma, ya mere ojiji azụmahịa ha na-eji ụgbọ ala na-arị elu.
NkeỌnụ ego nke PTFE Fuel Hosebụ tube nke nwere mkpuchi PTFE dị n'ime yana akwa akwa akwa akwa akwa igwe anaghị agba nchara dịka mkpuchi mkpuchi.PTFE liner yiri tube PTFE nke nwere mkpuchi nchebe mpụga, na-abawanye nguzogide nrụgide ya
Anyị na-enye nkwakọ ngwaahịa mbụ dị ka ndị a
1, akpa nylon ma ọ bụ akpa poly
2, igbe igbe
3, Plastic pallet ma ọ bụ plywood pallet
A na-ana ebubo nkwakọ ngwaahịa ahaziri ahazi
1. Osisi osisi
2. Osisi osisi
3. Ndị ọzọ ahaziri nkwakọ dịkwa
