Manufacturing Companies for Ptfe Hose And Motorcycle Brake – 1/8 ptfe brake hose with pvc covering | BSETEFLON – Besteflon
Manufacturing Companies for Ptfe Hose And Motorcycle Brake – 1/8 ptfe brake hose with pvc covering | BSETEFLON – Besteflon Detail:
Braided brake hose PTFE
One of the great advantages of PTFE brake hose is its incredible flexibility. When you need a tube to change direction, you can choose either to bend it or to place an adapter on it. This will have an impact on the flow rate and will also cause a drop in pressure. The more components you add, the greater the impact on the overall cost. PTFE pipes, on the other hand, have similar pressure capacity, but may not require joints and elbows.
Polytetrafluoroethylene (PTFE) is usually used as the main fuel line in jet airliners. If the passenger plane encounters an accident, the fuel pipeline will not break under pressure, and eventually will not cause fire hazard. The flexibility of the hose means that you can easily handle the offset between two elements of the system. The hose is actually very important to the designer and the erector of the fluid system.
PTFE is a hard nut to crack. It is usually corrosion resistant and easy to clean. If you use the right method, it can have a long shelf life extended by decades. It is not as conductive as stainless steel tubes, so it provides additional strength and reliability.
Braided stainless steel hose is much more expensive than rubber hose. You’ll find that woven stainless steel brake cables can only be seen on premium cars, such as hot sticks and super sports cars, or on cars ready for racing, which you can find in formula one and RV series. Braided stainless steel brake line is a post purchase upgrade. This is usually purchased and installed after purchase rather than before.
Label: application of PTFE brake hose, PTFE brake hose, PTFE hose and PTFE tube.
Product Details
| Brand Name: | BESTEFLON |
| Temperature range: | − 65 ℃～ + 260 ℃ |
| Working pressure: | 225bar ~ 44bar |
| Burst pressure: | 900bar ~ 176bar |
| Material: | PTFE |
| Inner layer: | ptfe hose |
| Reinforcing layer: | stainless steel wire braiding |
| Outer layer: | PVC, PU (black, red, blue, yellow, purple, transparent, gray, orange, etc.) |
| Hose size | An3, an4, an6, an8, an10, an12, an16, an20 |
| Inner diameter | 3.56mm, 4.83mm, 8.13mm, 10.7mm, 13mm, 16.3mm, 22.2mm, 28.6mm |
| Outer diameter | 6.35mm, 8mm, 10.9mm, 13.7mm, 16mm, 19.3mm, 26.2mm, 32.8mm |
| Length | any length |
Features of stainless steel braided PTFE brake hose:
Application:
AN SERIES PTFE BRAKE HOSE
| No. | Specification | Outer diameter | Inner diameter | Working pressure | Burst pressure | Minimum bending radius | |||||
| (inch) | (mm±0.2) | (inch) | (mm±0.1) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | ||
| 1 | -3 | 1/4 | 6.35 | 9/64 | 3.56 | 3260 | 225 | 13040 | 900 | 3/76 | 1 |
| 2 | -4 | 5/16 | 8 | 3/16 | 4.83 | 2750 | 190 | 11000 | 760 | 1/30 | 0.85 |
| 3 | -6 | 27/64 | 10.92 | 21/64 | 8.13 | 2540 | 175 | 10160 | 700 | 1/30 | 0.85 |
| 4 | -8 | 35/64 | 13.72 | 27/64 | 10.67 | 2030 | 140 | 8120 | 560 | 1/30 | 0.85 |
| 5 | -10 | 5/8 | 16 | 33/64 | 12.95 | 1740 | 120 | 6960 | 480 | 3/76 | 1 |
| 6 | -12 | 49/64 | 19.3 | 41/64 | 16.26 | 1270 | 88 | 5080 | 352 | 3/76 | 1 |
| 7 | -16 | 1-1/32 | 26.16 | 7/8 | 22.22 | 870 | 60 | 3480 | 240 | 1/21 | 1.2 |
| 8 | -20 | 1-9/32 | 32.77 | 1-1/8 | 28.57 | 630 | 44 | 2520 | 176 | 3/38 | 2 |
* Meet SAE 100R14 standard.
* Customer-specific products may be discussed with us for detailed.
Video
Give Us A E-Mail
sales02@zx-ptfe.com
Product detail pictures:
Related Product Guide:
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Manufacturing Companies for Ptfe Hose And Motorcycle Brake – 1/8 ptfe brake hose with pvc covering | BSETEFLON – Besteflon , The product will supply to all over the world, such as: Guinea, Germany, San Francisco, "Make the women more attractive "is our sales philosophy. "Being customers' trusted and preferred brand supplier" is the goal of our company. We are strict with every part of our work. We sincerely welcome friends to negotiate business and start cooperation. We hope to join hands with friends in different industries to create a brilliant future.
We offer the usual packing as follows
1、Nylon bag or poly bag
2、Carton box
3、Plastic pallet or plywood pallet
Customized Packaging is charged
1、Wooden reel
2、Wooden case
3、Other customized packaging also available
By Victoria from Madras - 2018.12.05 13:53
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Donna from Belarus - 2018.09.23 17:37
Send your message to us:
Products categories
-
OEM/ODM China Ptfe Tube Manufacturer - Ptfe Tu...
-
Factory Price Corrugated Ptfe Hose-939/393b - ...
-
Professional Design Convoluted Stainless Steel ...
-
Factory Price Ptfe Tubing 6mm - Tube ptfe ID 2...
-
OEM Customized Ptfe Extruded Tubing - Tube ptf...
-
Hot Selling for Ptfe Flexible Tubing - Tube pt...
