PTFE Corrugated Hose SS Resistance Kink Tidcan |BESTEFlon
OurFaa'iidooyinka
BesteflonIsticmaal habka qaabaynta jiingadaha sare, ka dib wakhti dheer oo la isticmaalo, ma fududa in la soo saaro dildilaaca, isticmaalka badbaado leh, nolol dheer.
Ujeedada naqshadeynta dhuumaha, shirku wuxuu gaari karaa ujeedooyinka soo socda: nuujinta gariirka, xakamaynta buuqa lagu gudbiyo tuubada adag, la qabsiga dib-u-celinta iyo leexinta dhaqdhaqaaqa, iyo hagaajinta ama hagaajinta gariir-yar.Dhererka tuubada waa la kala duwanaan karaa si loo buuxiyo shuruudaha waxqabadka qiimeynta marka loo eego dabacsanaanta iyo cadaadiska.
Ujeedada timaha birta ah ee aan lahayn waa in laga hortago dhererka.Dharka tidcan waxay ka samaysan tahay silig bir ah oo aan fiicneyn, iyo xiisadda tidcan waxaa ka dhasha cadaadiska tidcan si ay u bixiyaan caqabadaha radial iyo axial.Isku-xidhka badan ee tidcan ayaa la qabsanaya cadaadiska sare.
Bestflon calaamadPTFE Hosewuxuu leeyahay cabbirro xog ah oo u dhexeeya 3/16 "ilaa 2".PTFE oo bir ah oo tidcanbuskuduhu waxay leeyihiin cadaadis u dhexeeya ilaa 2944 psi, iyadoo ku xidhan cabbirka iyo xaaladaha hawlgalka.
Habka qaabeynta gaarka ah waxay soo saartaa dildilaacyo yar
Besteflon waxay isticmaashaa habka wax-qabashada ee horumarsan, ka dib wakhti dheer oo la isticmaalo, ma fududa in la soo saaro dildilaaca, isticmaalka badbaadada leh, nolol dheer.
Iska caabin Kink iyo dabacsanaan u leh maaraynta tuubooyinka fudud
Siligga birta ah ee ku duudduubay inta u dhaxaysa jiingadaha waxay bixisaa iska caabin kink iyadoo la ilaalinayo dabacsanaanta looga baahan yahay maaraynta tuubada.
Iska caabbinta faakuumka heerkulka sare
Tuubbadu waa faakuum u adkaysta - 0.9 bar heerkulka sare.Si aad u hesho macluumaad faahfaahsan iyo si aad u doorato xalka ugu fiican codsigaaga, fadlan la xidhiidh kooxdayada iibka.
Qalabyada PTFE ee la safan ee loogu talagalay Warbahinta Socodka Buuxa
Qalabyada (noocyada: Camlock, Triclamp, Flange) waxaa lagu dahaaran karaa lakabka PTFE si loo hubiyo socodka ku filan oo dhan dhererka tuubada tuubada.Buushka lagu rakibay tuubada waxay baabi'isaa aagagga fadhiidnimada dareeraha halkaasoo qaybo ka mid ah warbaahinta la soo gudbiyay ay ku urursan karaan.Intaa waxaa dheer, xuubka xadhkaha ayaa go'doomin kara walxaha tuubada marka la keeno warbaahinta kimikalka leh.
gidaarka gudaha
Darbiga dhexdhexaadka ah, PTFE-dabiici ah oo cad/dhammaan ah
Tidcan
Hal bir ah oo aan lahayn 304/316 tidcan silig
Kala duwanaanta heerkulka
Laga bilaabo -65 ilaa +260ºC(-85°F---500°F)
Isku-xidhka
Isku-xidhka-ku-xidhka-ku-xiran ee naqshad kasta iyo nooc kasta
Astaamaha
Iska caabbinta daxalka
Iska caabbinta gabowga / oksaydhka / midabaynta
Ku habboon cadaadiska iyo faakuumka
Ku habboon xoogga farsamada sare
Faahfaahinta Alaabta
| Magaca Summada: | BESTEFlon |
| Qalabka: | 100% bikradPTFE+ silig bir ah oo aan lahayn |
| Faahfaahin: | 3/16 ilaa 2' |
| Dhumucda: | 0.85/1/1.2/1.5MM |
| Midabka tuubada gudaha: | caddaan caano leh/dhammaan |
| Kala duwanaanta heerkulka: | -65℃--+260℃ |
| Silig tidcan: | 304/316 silig bir ah oo tidcan |
| Codsiga: | Qalabka kiimikaad/Mashiinada//Gaaska cufan/Shidaalka iyo maaraynta saliidaha/wareejinta uumiga/Nidaamka Haydarooliga/Caafimaadka/Cuntada/Warshada daawooyinka |
Kala-duwanaanta Tuubbada Isku-dhafka ah
| Maya | Dhexroorka gudaha | Dhexroorka dibadda | Tube Wall Dhumucda | Cadaadiska shaqada | Cadaadiska dilaaca | Laab laabashada ugu yar | Tilmaamid | cabbirka gacanta | ||||||
| (inji) | (mm±0.2) | (inji) | (mm±0.2) | (inji) | (mm±0.1) | (psi) | (baar) | (psi) | (baar) | (inji) | (mm) | |||
| ZXBW201-04 | 3/16" | 5.0 | 0.433 | 11.0 | 0.035 | 0.90 | 2944 | 203 | 8831 | 609 | 0.709 | 18 | -3 | ZX710-03 |
| ZXBW201-05 | 1/4" | 6.5 | 0.472 | 12.0 | 0.035 | 0.90 | 2489 | 172 | 7468 | 515 | 0.787 | 20 | -4 | ZX710-04 |
| ZXBW1201-06 | 5/16" | 8.0 | 0.516 | 13.1 | 0.035 | 0.90 | 2001 | 138 | 6003 | 414 | 0.906 | 23 | -5 | ZX710-05 |
| ZXBW201-08 | 3/8" | 10.0 | 0.610 | 15.5 | 0.035 | 0.90 | 1730kii | 119 | 5191 | 358 | 0.984 | 25 | -6 | ZX710-06 |
| ZXBW201-10 | 1/2" | 13.0 | 0.756 | 19.2 | 0.035 | 0.90 | 1498kii | 103 | 4495 | 310 | 1.102 | 28 | -8 | ZX710-08 |
| ZXBW201-12 | 5/8" | 16.0 | 0.906 | 23.0 | 0.035 | 0.90 | 1160 | 80 | 3480 | 240 | 1.969 | 50 | -10 | ZX710-10 |
| ZXBW201-14 | 3/4" | 19.0 | 1.055 | 26.8 | 0.035 | 0.90 | 1015 | 70 | 3045 | 210 | 2.480 | 63 | -12 | ZX710-12 |
| ZXBW201-16 | 7/8" | 22.2 | 1.181 | 30.0 | 0.039 | 1.00 | 923 | 64 | 2770 | 191 | 3.346 | 85 | -12 | ZX710-14 |
| ZXBW201-18 | 1" | 25.0 | 1.299 | 33.0 | 0.039 | 1.00 | 793 | 55 | 2378 | 164 | 3.543 | 90 | -16 | ZX710-16 |
| ZXBW201-20 | 1-1/8" | 28.0 | 1.398 | 35.5 | 0.039 | 1.00 | 575 | 40 | 1726 | 119 | 3.740 | 95 | -18 | ZX710-18 |
| ZXBW201-22 | 1-1/4" | 32.0 | 1.634 | 41.5 | 0.055 | 1.40 | 450 | 31 | 1349 | 93 | 3.937 | 100 | -20 | ZX710-20 |
| ZXBW201-26 | 1-1/2" | 38.0 | 1.890 | 48.0 | 0.059 | 1.50 | 392 | 27 | 1175 | 81 | 6.102 | 155 | -24 | ZX710-24 |
| ZXBW201-32 | 2" | 50.0 | 2.461 | 62.5 | 0.079 | 2.00 | 300 | 21 | 899 | 62 | 7.874 | 200 | -32 | ZX710-32 |
* Alaabooyinka gaarka ah ee macaamiisha ayaa laga yaabaa in nagala hadlo si faahfaahsan.
Aqoon-is-weydaarsi wax-soo-saar
Sidee loo gooyaa tuubada PTFE si looga fogaado waxyeellada tuubada?
Si loo gaaro ujeedada kor ku xusan, qaabka utility wuxuu bixiyaa nidaamkan farsamada ee soo socda: qalab goynta ah oo loogu talagalay soo saarista tuubooyinka polytetrafluoroethylene, oo ay ku jiraan miiska shaqada, dusha sare ee miiska shaqada waxaa lagu bixiyaa dhejis, bartamaha hoose ee hoose Taageerada ayaa si go'an loogu xirayaa dhululubo haydarooliga ah, shafka wax soo saarka ee dhululubada hydraulic si go'an ayaa loogu xiraa gooyo, iyo bartamaha dusha sare ee shaqada miiska shaqada waxaa lagu bixiyaa jeexdin kowaad. hal dhinac oo ka mid ah jeexdin koowaad waxaa la siiyaa jeexdin labaad, jeexdin labaad waxaa la siiyaa jir saxan koowaad ah, derbiga dibadda ee jidhka saxan koowaad ayaa si isku mid ah loogu rakibay block hore ee slide ah, block ugu horrayn simbiriirixan ee jeexdin labaad. , Hal dhinac oo ka mid ah saxanka ugu horreeya ee ka fog jeexdin koowaad ayaa si go'an loogu xirayaa dhagaxa dusha hore ee miiska shaqada waxaa lagu bixiyaa jeexdin saddexaad, ruxiyuhu wuxuu ku yaalaa godka saddexaad, jeexdin koowaad waxaa la siiyaa saxan xaddidan. , Mid ka mid ah saxan xadka ka fog jeexdin ugu horeysay si go'an la xidhiidha xajin, oogada dambe ee worktable waxaa la siiyaa dunta dhex dalool, iyo usha furku waxa uu ku xidhan yahay dunta dunta dhex dalool.jar tuubada PTFE
Waxaan bixinaa xirmada caadiga ah sida soo socota
1. Bacda nylon ama bac
2, sanduuqa kartoonka
3
Baakadaha la habeeyey waa lagu dalacay
1
2. Kiis alwaax ah
3. Baakadaha kale ee la habeeyey ayaa sidoo kale la heli karaa
