Heerkulka sare ee tuubada PTFE ee daabacayaasha 3D |BESTEFlon
Maadaama agabka injineernimada ay u baahan yihiin heerkul sare oo joogto ah daabacayaasha 3D, shuruudaha ka kooban ayaa sarreeya.Sidaa darteed, daabacaha 3D ayaa isticmaalayatuubada PTFEsida tuubada quudinta (tuubada quudinta).Tuubooyinka PTFE ayaa si weyn loogu isticmaalaa warshadaha daabacadaha 3D, badiyaa sababtoo ah waxqabadka soo socda:
Dheef la'aan: PTFE waa mid aan shaqaynayn, ku dhawaad dhammaan walxaha kuma xidhna tuubada PTFE, filimada aadka u dhuuban waxay sidoo kale muujinayaan sifooyin aan dhejis ahayn.
Kulaylka iyo iska caabinta qabow: Tuubbada PTFE waxay leedahay kulayl aad u fiican iyo iska caabin heerkul hooseeya.Waxay u adkeysan kartaa heerkulka ilaa 300 ℃ waqti gaaban gudaheed, barta dhalaaliduna waa 327 ℃.Ma dhalaali doonto at 380 ℃.Guud ahaan, waxaa loo isticmaali karaa si joogto ah inta u dhaxaysa 240 ℃ iyo 260 ℃.Waxay leedahay xasillooni kulayl oo cajiib ah.Waxay ku shaqayn kartaa heerkulka qaboojinta.Ma jiraan wax qallafsan, iska caabin qabow oo ah 65 ℃.
3. Dufan: Tuubbada PTFE waxa ay leedahay isku-xidhnaan hoose.Isku-dhafka is-burburku wuu is beddelaa marka culeysku simbiriirixanayo, laakiin qiimuhu wuxuu u dhexeeyaa oo keliya 0.04-0.15.
4. Non-hygroscopicity: Dusha sare ee tuubada PTFE kuma dhajin biyaha iyo saliidda, mana fududa in lagu dhajiyo xalka inta lagu jiro hawlaha wax soo saarka.Haddii ay jirto qadar yar oo wasakh ah, waxaa laga saari karaa in si fudud loo tirtiro.Waqti gaaban oo gaaban, badbaadinta saacadaha shaqada iyo hagaajinta hufnaanta shaqada.
5. Iska caabbinta daxalka: tuubada PTFE si dhib yar bay kiimikooyinku u daxalaystaan, waxayna u adkeysan kartaa dhammaan asiidhyada xooggan (oo ay ku jiraan aqua regia), alkalis xoog leh, iyo asiidh xooggan marka laga reebo biraha alkali ee dhalaalay, warbaahinta fluorinated, iyo sodium hydroxide ee ka sarreeya 300 ° C.Doorka oxidants, yaraynta wakiilada iyo dareerayaasha organic kala duwan waxay ka ilaalin karaan qaybaha nooc kasta oo daxalka kiimikada.
6. Cimilada iska caabbinta: da' la'aan, nolol aan gaboobayn oo wanaagsan oo balaastikada ah.
7. aan sun ahayn: jawi caadi ah oo u dhexeeya 300 ℃, jidh ahaan aan firfircoonayn, aan sun ahayn ayaa loo isticmaali karaa qalabka caafimaadka iyo cuntada.
8. Insulation: Dielectric joogto ah oo aad u wanaagsan oo heer sare ah.
9. Isku-dhafka is-burburku waa yar yahay, dareeraha alaabta ceeriin waa wanaagsan tahay.
Sababtoo ah waxqabadka wanaagsan ee tuubada PTFE, ma aha oo kaliya ku habboon warshadaha daabacaadda 3D, laakiin sidoo kale si ballaaran ayaa loo adeegsadaa dhuumaha anticorrosion, heerkulka sare, heerkulka hooseeya iyo iska caabinta daxalka.Oo loo isticmaalo bay'ada adag sida saliidaynta, elektiroonigga, qalabka korontada, hawada hawada iyo daawaynta.
Faahfaahinta Alaabta
| Magaca Summada: | BESTEFlon |
| Midabka: | caddaan caano ah/bandhig/madow/buluug/madawga aad u baahantahay |
| Faahfaahin: | Aqoonsiga 2mm*OD 4mm |
| Dhumucda: | 1mm |
| Qalabka: | PTFE |
| Qiyaasta heerkulka shaqada: | -65℃-+260℃ |
| Codsiga: | Daabacaha 3D |
| Nooca Ganacsiga: | Soo-saare/Warshad |
| Heerka: | ISO9001 |
Qiyaasta cabbirka tuubooyinka jilicsan
| Maya | Tilmaamid | Dhexroorka dibadda | Dhexroorka gudaha | Dhumucda gidaarka Tube | Cadaadiska shaqada | Cadaadiska dilaaca | |||||
| mm | (inji) | mm | (inji) | mm | (inji) | (psi) | (baar) | (psi) | (baar) | ||
| 1 | 1/8"*1/16" | 3.17 | 0.125 | 1.58 | 0.062 | 0.8 | 0.031 | 218 | 15.0 | 725 | 50 |
| 2 | 3/16"*1/8" | 4.76 | 0.187 | 3.17 | 0.125 | 0.8 | 0.031 | 174 | 12.0 | 638 | 40 |
| 3 | 1/4"*3/16" | 6.35 | 0.250 | 4.76 | 0.187 | 0.8 | 0.031 | 131 | 9.0 | 464 | 32 |
| 4 | 5/16 "* 1/4" | 7.93 | 0.312 | 6.35 | 0.250 | 0.8 | 0.031 | 102 | 7.0 | 363 | 25 |
| 5 | 3/8"*1/4" | 9.52 | 0.357 | 6.35 | 0.250 | 1.5 | 0.059 | 174 | 12.0 | 638 | 44 |
| 6 | 3/8"*5/16" | 9.52 | 0.357 | 7.93 | 0.312 | 0.8 | 0.031 | 87 | 6.0 | 319 | 22 |
| 7 | 1/2"*3/8" | 12.7 | 0.500 | 9.6 | 0.378 | 1.5 | 0.059 | 131 | 9.0 | 464 | 32 |
| 8 | 5/8"*1/2" | 15.87 | 0.625 | 12.7 | 0.500 | 1.5 | 0.059 | 102 | 7.0 | 363 | 25 |
| 9 | 3/4"*5/8" | 19.05 | 0.750 | 15.87 | 0.625 | 1.5 | 0.059 | 87 | 6.0 | 319 | 22 |
* La kulan heerka SAE 100R14
* Alaabooyinka gaarka ah ee macaamiisha ayaa laga yaabaa in nagala hadlo si faahfaahsan.
Tuubooyinka Imperial Range ee siman
| Maya | Tilmaamid | Dhexroorka dibadda | Dhexroorka gudaha | Dhumucda gidaarka Tube | Cadaadiska shaqada | Cadaadiska dilaaca | |||||
| mm | (inji) | mm | (inji) | mm | (inji) | (psi) | (baar) | (psi) | (baar) | ||
| 1 | 2*4 | 4 | 0157 | 2 | 0.079 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 2 | 3*5 | 5 | 0.197 | 3 | 0.118 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 3 | 4*6 | 6 | 0.236 | 4 | 0.157 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 4 | 5*7 | 7 | 0.276 | 5 | 0.197 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 5 | 6*8 | 8 | 0.315 | 6 | 0.236 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 6 | 8*10 | 10 | 0.394 | 8 | 0.315 | 1 | 0.039 | 148 | 10.2 | 444 | 30.6 |
| 7 | 10*12 | 12 | 0.472 | 10 | 0.394 | 1 | 0.039 | 118 | 8.16 | 370 | 25.5 |
| 8 | 12*14 | 14 | 0.551 | 12 | 0.472 | 1 | 0.039 | 118 | 8.16 | 370 | 25.5 |
| 9 | 14*16 | 16 | 0.630 | 14 | 0.551 | 1 | 0.039 | 118 | 8.16 | 370 | 25.5 |
| 10 | 16*18 | 18 | 0.709 | 16 | 0.630 | 1 | 0.039 | 118 | 8.16 | 370 | 25.5 |
| 11 | 20*24 | 24 | 0.945 | 20 | 0.787 | 2 | 0.079 | 74 | 5.1 | 296 | 20.4 |
| 12 | 50*54 | 54 | 2.126 | 50 | 1.969 | 2 | 0.079 | 74 | 5.1 | 296 | 20.4 |
Video
Baro wax badan oo ku saabsan alaabta BESTEFlon
Noogu soo dir e-mail
sales02@zx-ptfe.com
Su'aal:Ma loo isticmaali karaa sidii dhuumaha shidaalka?
Jawaab:Haa, qiimaynta heerkulka sare.
Su'aal:Tan ma loo isticmaali karaa cabitaan?
Jawaab:Heerka cuntada tuubada PTFE waa OK, laakiin isticmaalka shakhsi ahaan, qiimuhu waa ka qaalisan yahay, marka loo eego cawska caaga ah ee guud way adkaan doontaa.
Su'aal:Tan si toos ah ma loo kala saari karaa?
Jawaab:Waxaan filayaa inaad awooddo.Waxaa laga yaabaa inaad rabto inaad sameyso qalab si dildilaacyadu si siman ugu qaybsan yihiin dhererka (si sahlan in la sameeyo marka la sii marayo tuubada) oo aad isticmaasho daab fiiqan oo qumman (xacto ama garbaha garka hiwaayadda la midka ah ayaa shaqayn doona).Sababta, taasi waxay noqon doontaa su'aal kaliya oo aad ka jawaabi karto.
Waxaan bixinaa xirmada caadiga ah sida soo socota
1. Bacda nylon ama bac
2, sanduuqa kartoonka
3
Baakadaha la habeeyey waa lagu dalacay
1
2. Kiis alwaax ah
3. Baakadaha kale ee la habeeyey ayaa sidoo kale la heli karaa
