I-AN-fittings dimension - Igayidi yosayizi olungile

I-AN-fittings dimension - Umhlahlandlela wosayizi olungile

Ukulinganisa, ipayipi nosayizi bamapayipi eminye yemibuzo evame kakhulu kanye nemibono eyiphutha mayelana nezinhlelo ze-AN.I-AN ikalwa ngamayintshi, lapho i-AN1 ngokwengqondo ithi 1/16" futhi AN8 ingu-1/2", ngakho-ke AN16 ingu-1". I-AN8 akuyona u-10 noma u-8mm, okuwumbono oyiphutha ovamile. Indlela yokulinganisa iphinde ibe umbono oyiphutha ovamile uma kunezinhlobo ezahlukene zokufakwa kwe-AN, amapayipi, amapayipi neziqeshana zokhiye Konke lokhu kunamanani ahlukene wokulinganisa Ukuze kucace, sihlukanise imininingwane ngezigaba ezahlukene.

1. Ubukhulu obulingana ne-AN

2. I-AN-hoseizilinganiso

3. Ubukhulu bepayipi / ishubhu

4. Ubukhulu bokubamba ukhiye we-AN

Ingabe ulinganisa ububanzi bangaphandle noma ububanzi bangaphakathi?Intambo ngaphakathi noma ngaphandle ububanzi?Sizochaza ukuthi kwenziwa kanjani lo msebenzi lapha!

Ukufakwa kwezinto, okufushane kwe-Army-Navy, kwavela phakathi neMpi Yezwe Yesibili lapho kunesidingo sokufakwa okulula nokubekezelelwa kangcono kunezinsimbi ezijwayelekile zama-hydraulic.Ukufakwa kwe-AN sekube yindinganiso ku-aftermarket, ukusebenza nokundiza kokuzilibazisa.

1. Ubukhulu obulingana ne-AN

Ukufakwa kwe-AN kuchazwa nje njengokufakwa kwe-aluminium JIC nokubekezelelana okuphezulu.Ubukhulu beshubhu bulinganiswa emicu.

Owesilisa olingana (i-diameter yangaphandle)

Ngezansi kochungechunge kuboniswa ngobukhulu obuyintshi/imethrikhi kuntambo/ububanzi obungaphandle bemethrikhi.

I-AN4= 7/16" -20 = ~9,1mm emicu = ~ ~11,8mm OD

I-AN6 = 9/16" -18 = ~11,6mm emicu = ~ ~14,2mm OD

I-AN8= 3/4" -16 = ~16,6mm emicu = ~ ~ 19,0mm OD

I-AN10= 7/8" -14 = ~19,5mm emicu = ~ ~22,3mm OD

I-AN12= 1-1/16" -12 = ~23,8mm emicu = ~ ~26,9mm OD

I-AN16= 1-5/16" -12 = ~30,2mm emicu = ~ ~33,3mm OD

I-AN20= 1-5/8" -12 = ~38,2mm emicu = ~ ~41,4mm OD

Ubukhulu obulingana ne-AN

Owesifazane olingana AN (ububanzi bangaphakathi)

Uchungechunge luboniswa ngo-inch/metric ngaphakathi kobubanzi.

I-AN4= 7/16" -20 = ~9,9mm ID

I-AN6= 9/16" -18 = ~12,9mm ID

I-AN8= 3/4" -16 = ~17,5mm ID

I-AN10= 7/8" -14 = ~20,6mm ID

I-AN12= 1-1/16" -12 = ~24,9mm ID

I-AN16= 1-5/16" -12 = ~31,2mm ID

I-AN20= 1-5/8" -12 = ~39,1mm ID

Owesifazane olingana AN (ububanzi bangaphakathi)

Isiphetho se-AN-hose ububanzi bangaphakathi

Isilinganiso sangaphakathi seziphetho zepayipi le-AN siboniswa lapha.Qaphela ukuthi ubukhulu bangaphakathi bokuphela kwepayipi nokufakwayo kungahluka kuye ngohlobo, impahla, umkhiqizi, njll. Ngakho-ke, lobu bukhulu bangaphakathi kufanele busetshenziswe kuphela njengesiqondiso.

I-AN4= ~ 3,7mm

I-AN6= ~ 6,0mm

I-AN8= 8,6mm

I-AN10= ~11,1mm

I-AN12= ~ 14,3mm

I-AN16= ~ 19mm

I-AN20= ~ 25mm

Ama-adaptha ahambisanayo e-AN ngokuvamile anobubanzi obungu-1mm obukhulu bangaphakathi.Uma i-adaptha incishiswa ibe intambo encane, ububanzi bangaphakathi buzoncipha.

Isiphetho se-AN-hose ububanzi bangaphakathi

2. Ubukhulu be-AN-hose

Ubukhulu bepayipi likalwa ngaphakathi kwepayipi = (hose ngaphakathi ububanzi).Kuye ngohlobo lwe-hose, ububanzi bangaphandle be-hose buzohluka.Uhlobo lobuchwepheshe bepayipi nalo lishintshile kusukela ngeMpi Yezwe Yesibili ngenkathi lokhu kuxhumana kwethulwa, ngakho-ke ubukhulu bangempela bepayipi le-AN bungahluka.Ingase futhi ihluke kumkhiqizi kuye kumkhiqizi.Ngakho qiniseka ukuthi usebenzisa ipayipi elifanele emaphethelweni akho e-AN hose kanye nesistimu ye-AN!

Ubukhulu bepayipi lerabha elilukiwe

I-AN4= 7/32" ~5,4mm

I-AN5= 5/16" ~7,9mm

I-AN6= 11/32 ~ 8,7mm

I-AN8= 7/16" ~11,1mm

I-AN10= 9/16" ~14,2mm

I-AN12= 11/16" ~17,4mm

I-AN16= 7/8" ~22,2mm

I-AN20= 1-1/8" ~28,5mm

Ubukhulu bepayipi le-PTFE elilukiwe

I-AN4= 3/16" ~4,8mm

I-AN6= 21/64" ~8,1mm

I-AN8= 27/64" ~10,7mm

I-AN10= 33/64" ~13,0mm

I-AN12= 41/64" ~16,3mm

I-AN16= 7/8" ~22,2mm

Ubukhulu be-AN-hose

3. Ubukhulu bepayipi / ishubhu

Usayizi weshubhu ulinganiswa kububanzi obungaphandle beshubhu.Ugqinsi luyahlukahluka kumkhiqizi kuya kumkhiqizi ngakho-ke ubukhulu bangaphakathi buzohluka.Kodwa sekukonke, ishubhu le-AN4 linogqinsi lwedonga elingu-~1.5mm kanye neshubhu le-AN12 linogqinsi elingu-~2.5mm.

I-AN4= 1/4" ipayipi OD = ~6,35mm

I-AN5= 5/16" ipayipi OD = ~7,9mm

I-AN6= 3/8" ipayipi OD = ~ 9,5mm

I-AN8= 1/2" ipayipi OD = ~12,7mm

I-AN10= 5/8" ipayipi OD = ~15,9mm

I-AN12= 3/4" ipayipi OD = ~19,05mm

Ubukhulu beshubhu ye-AN

4. Ubukhulu bokubamba ukhiye we-AN

Ukubamba kokufakwayo kwe-AN nakho kukalwa ngamayintshi, futhi ngenxa yezinga elihlukile lezilinganiso emazweni ahlukene, isikrufu sesokhethi esilungisekayo noma amathuluzi ayintshi ayanconywa ukuze ahlanganiswe ukuze kuqinisekiswe ukusebenzelana okulungile.Amathuluzi akhethekile atholakalela ukufakwa kwe-AN kuphela, kodwa isikrufu esilungisekayo esijwayelekile sizosebenza kahle.

I-AN3= 1/2" = ~12,7mm

I-AN4= 9/16" = ~14,3mm

I-AN6= 11/16" = ~17,48mm

I-AN8= 7/8" = ~22,23mm

I-AN10= 1" = ~25,4mm

I-AN12= 1-1/4" = ~31,75mm

I-AN16= 1-1/2" = ~38,1mm

I-AN20= 1-13/16" = ~46,0mm

Ubukhulu bokubamba ukhiye we-AN

Isikhathi sokuthumela: May-29-2023

Thumela umlayezo wakho kithi:

Bhala umyalezo wakho lapha futhi usithumelele wona